How does this machine differ from the DLP-600 BIB?

Both make bags with a valve. This configuration is optimised for the beverage segment and stand-up geometries, the DLP-600 BIB for classic bag-in-box containers up to 25 litres.

Which valve types can be processed?

Standard BIB dispensing valves. We confirm the specific valve type before quoting, as feeding and sealing tools are matched to it.

Is a recyclable version possible?

Yes. PE mono-material with a PE-based valve produces a single-polymer recyclable bag. Barrier properties are then lower than with aluminium laminates and must match the shelf-life requirement.

DLP-600 Standbeutel mit Ventil

DLP-600: stand-up pouch with valve for beverages

The DLP-600 stand-up pouch with valve is a bag-making machine for beverage bag-in-box. It produces 4-side-seal pouches and inserts the dispensing valve in the same pass. It is designed for fruit juices, beverage bases and other liquid foods.

Category: Food
Technology line: Intelligent line

Request a quote for DLP-600 Standbeutel mit Ventil Get in touch

Bag formats

Beverage bag-in-box with valve
4-side-seal liquid pouches
Stand-up pouches with dispensing valve

Materials

Mono-material PE (recyclable)
PET/AL/PE laminate for juice storage
EVOH barrier films

Applications

Fruit juice and juice drinks
Beverage bases for postmix systems
Wine in dispensing packs
Liquid dairy products

What defines this machine

Designed for beverages

Seal parameters, valve type and seam geometry are matched to low-viscosity liquids, where a leaking seal shows up immediately.

Inline valve insertion

Feeding, positioning and sealing of the valve happen on the same machine. No intermediate storage of half-finished bags, no second line.

Selectable oxygen barrier

Aluminium or EVOH laminates are processed depending on shelf-life requirements. Mono-PE is available for recyclable concepts.

Pulse sealing for thin films

A short heating phase with active cooling prevents material damage at the seam, allowing thinner films at the same tightness: less material per bag.

Technical data

DLP-600 Standbeutel mit Ventil: Technical data
Bag type	4-side seal with valve
Target market	beverage BIB
Bag width	on request
Bag length	on request
Output rate	on request
Max. film width	on request
Max. reel diameter	on request
Connected load	on request
Compressed air	on request
Machine dimensions (L × W × H)	on request
Weight	on request

Numerical values are confirmed by the factory for your application. We supply the full data sheet with the quotation.

Frequently asked questions

How does this machine differ from the DLP-600 BIB?: Both make bags with a valve. This configuration is optimised for the beverage segment and stand-up geometries, the DLP-600 BIB for classic bag-in-box containers up to 25 litres.
Which valve types can be processed?: Standard BIB dispensing valves. We confirm the specific valve type before quoting, as feeding and sealing tools are matched to it.
Is a recyclable version possible?: Yes. PE mono-material with a PE-based valve produces a single-polymer recyclable bag. Barrier properties are then lower than with aluminium laminates and must match the shelf-life requirement.